The Jasic TIG180P is an inverter-based DC Tig welding machine with High Frequency arc ignition and Pulse capability. The HF arc ignition provides Pre Gas flow and instant arc ignition with the press of the torch switch leaving no tungsten inclusion and no contamination of the tungsten electrode. Down Slope & Post Gas functions allow you to finish the weld process professionally. 2 Pulse Frequency options allow the ability to control heat input, penetration and help control distortion. The DC MMA welding capability delivers a smooth and stable arc allowing easy welding with electrodes obtaining high quality welds including cast iron, stainless and low hydrogen. The TIG180P is a professional machine that is suitable for multiple applications; stainless steel fabrication, light industrial use, site welding, repair and maintenance applications. Manufactured in compliance to AS/NZ60974.1 and fitted with a 15 amp 3-pin plug. DC TIG (DC tungsten inert gas) welding HF Arc ignition Pulse function, Low 2.5Hz - High 250Hz Down slope time - 0-5 seconds Post flow gas 0-10 seconds MMA (stick electrode) welding Hot Start (improves electrode starting) Arc Force (boosts current to prevent electrode extinguishing) Thermal overload protection Generator compatible (recommend 6.5KVA minimum) Tolerant to variable power supplies Power Supply 240V single phase ±15% Rated Input Power (KVA) 5.0 ieff (Amps) 11.4 Rated Input Current (A) 16.3 Rated Output - 10-150A/26.0V MMA / 10-180A/17.2V TIG No-Load Voltage (V) 56 Duty Cycle @ 25 degrees C - 60%@150Amps MMA / 60%@180Amps TIG Efficiency (%) 85 Power Factor 0.93 Protection Class IP23 Insulation Class B Size (mm) 400 x 150 x 260 Weight (kg) 9kg Warranty 2 Years on power source Package includes: Power source, 17-series Tig Torch 4mtr, Argon Flowtube Regulator, Arc Lead set x 4mtr. Disposable Argon gas cylinders are optional and extra.