Description
Mobil DTE 20 Series oils are high performance anti-wear hydraulic oils.
They meet the stringent requirements of hydraulic systems using high pressure, high output pumps as well another hydraulic system components such as close clearance servo-valves and numerically controlled (NC) machine tools. These products met the most rigorous performance requirements of a wide range of hydraulic system and component manufacturers, allowing use of a single product with excellent performance characteristics.
Keep clean properties reduce system deposits and sludge help protect equipment and extend equipment life, reduce maintenance costs and improve total system performance. Quality reserve maintains performance features even under severe service conditions and extended drain intervals. Always consult your owner’s manual to check recommended viscosity grade and specifications.
Applications
Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional
Products. Hydraulic systems requiring a high load-carrying capability and anti-wear protection, and when thin oil-film corrosion protection is an asset. Where small amounts of water are unavoidable
Systems containing gears and bearings.Machines employing a wide range of components using various metallurgy
Specifications and approvals
DIN 51524-2: 2006-09
Mobil DTE 20 Series meets or exceeds the requirements of:
DENISON HF-0, HUSKY HS 207, VICKERS I-286-S, VICKERS M-2950-S, Fives Cincinnati, HOCNF
Typical properties
ISO VG, 46
Viscosity, ASTM D445
cSt @ 100°C 6.7
cSt @ 40°C 44.2
Viscosity Index, ASTMD2270-98
Pour Point, °C, ASTM D97 -27
Flash Point, COC, ASTM D92-232
Foam, Seq I,Tendency/Stability, 20/0
Foam, Seq II,Tendency/Stability, ASTM D892 20/0
Foam, Seq III,Tendency/Stability, ASTM D892 20/0
Copper strip corrosion, 3 hrs@ 100°C, ASTM D130 1B
Rust protection Proc B,ASTM D665 PASS
****FZG Failure Load Stage,ISO 14635-1(mod) 12
They meet the stringent requirements of hydraulic systems using high pressure, high output pumps as well another hydraulic system components such as close clearance servo-valves and numerically controlled (NC) machine tools. These products met the most rigorous performance requirements of a wide range of hydraulic system and component manufacturers, allowing use of a single product with excellent performance characteristics.
Keep clean properties reduce system deposits and sludge help protect equipment and extend equipment life, reduce maintenance costs and improve total system performance. Quality reserve maintains performance features even under severe service conditions and extended drain intervals. Always consult your owner’s manual to check recommended viscosity grade and specifications.
Applications
Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional
Products. Hydraulic systems requiring a high load-carrying capability and anti-wear protection, and when thin oil-film corrosion protection is an asset. Where small amounts of water are unavoidable
Systems containing gears and bearings.Machines employing a wide range of components using various metallurgy
Specifications and approvals
DIN 51524-2: 2006-09
Mobil DTE 20 Series meets or exceeds the requirements of:
DENISON HF-0, HUSKY HS 207, VICKERS I-286-S, VICKERS M-2950-S, Fives Cincinnati, HOCNF
Typical properties
ISO VG, 46
Viscosity, ASTM D445
cSt @ 100°C 6.7
cSt @ 40°C 44.2
Viscosity Index, ASTMD2270-98
Pour Point, °C, ASTM D97 -27
Flash Point, COC, ASTM D92-232
Foam, Seq I,Tendency/Stability, 20/0
Foam, Seq II,Tendency/Stability, ASTM D892 20/0
Foam, Seq III,Tendency/Stability, ASTM D892 20/0
Copper strip corrosion, 3 hrs@ 100°C, ASTM D130 1B
Rust protection Proc B,ASTM D665 PASS
****FZG Failure Load Stage,ISO 14635-1(mod) 12