Description
LOCTITE 609 is a low viscosity, rapid-curing anaerobic adhesive that augments the strength of press fit
assemblies or slip fit assemblies up to 0.006" in
diameter.
Adds up to 3,000 psi holding power.
Recommended for parts that will need subsequent
dismantling, i.e., retention of bearings onto shafts and into housings.
Mil Spec (R-46082B) Type I.
Cure Time: Fixture - 10 minutes Full - 24 hours
Max gap fill: 0.12mm
Temperature resistance: 150 degrees C
Shear strength: 15.8 /mm2
assemblies or slip fit assemblies up to 0.006" in
diameter.
Adds up to 3,000 psi holding power.
Recommended for parts that will need subsequent
dismantling, i.e., retention of bearings onto shafts and into housings.
Mil Spec (R-46082B) Type I.
Cure Time: Fixture - 10 minutes Full - 24 hours
Max gap fill: 0.12mm
Temperature resistance: 150 degrees C
Shear strength: 15.8 /mm2
