Description
Tinted UV oils for exterior timbers
Very water and dirt resistant
Reduces wood swelling and shrinkage
Resists growth of algae and mildew and resists fungal attack
Microporous, breathable finish which does not crack, peel, flake or blister
No sanding necessary for future applications
Coverage: Approximately 18 square metres per litre with one coat
No. of coats: 2
Application temperature: +5°C to 35°C
Drying time: 12 hours
Tinted UV Protection Oils are lightly tinted oils for exterior timber joinery, timber garden furniture, pergolas, timber doors, fascias and other trim.
Not suitable for use on horizontal surfaces such as timber decks.
The microporous surface allows the wood to breathe, thereby reducing swelling and shrinkage. The finish helps to slow the greying process on vertical surfaces.
The finish contains biocides, which are active ingredients helping to prevent mould, algae and fungal attack. As such, they should not be used internally, or externally on tables etc where food may be eaten, or timber decking which will be walked upon.
Available in 7 lightly tinted colour tones. A 2 coat application (or possibly 3 thin coats for softwoods or timbers in full exposed conditions). With the strength of the UV in New Zealand, the treated surface should be inspected regularly for fading, and maintenance undertaken where required. In most situations, the finish will last 12-18 months before recoat is required. Recoat is easy. Generally, a wash down and clean is all that is needed, followed by one rejuvenation coat once the timber is dry. Where the timber has been left to grey off, the wood will need rejuvenation with a product such as Osmo’s Wood Reviver Power Gel.
In all cases a trial test to determine suitability is recommended.
Very water and dirt resistant
Reduces wood swelling and shrinkage
Resists growth of algae and mildew and resists fungal attack
Microporous, breathable finish which does not crack, peel, flake or blister
No sanding necessary for future applications
Coverage: Approximately 18 square metres per litre with one coat
No. of coats: 2
Application temperature: +5°C to 35°C
Drying time: 12 hours
Tinted UV Protection Oils are lightly tinted oils for exterior timber joinery, timber garden furniture, pergolas, timber doors, fascias and other trim.
Not suitable for use on horizontal surfaces such as timber decks.
The microporous surface allows the wood to breathe, thereby reducing swelling and shrinkage. The finish helps to slow the greying process on vertical surfaces.
The finish contains biocides, which are active ingredients helping to prevent mould, algae and fungal attack. As such, they should not be used internally, or externally on tables etc where food may be eaten, or timber decking which will be walked upon.
Available in 7 lightly tinted colour tones. A 2 coat application (or possibly 3 thin coats for softwoods or timbers in full exposed conditions). With the strength of the UV in New Zealand, the treated surface should be inspected regularly for fading, and maintenance undertaken where required. In most situations, the finish will last 12-18 months before recoat is required. Recoat is easy. Generally, a wash down and clean is all that is needed, followed by one rejuvenation coat once the timber is dry. Where the timber has been left to grey off, the wood will need rejuvenation with a product such as Osmo’s Wood Reviver Power Gel.
In all cases a trial test to determine suitability is recommended.
