Description
The pneumatic dent puller has a 3lb. (1.36kg.) slide hammer and is fitted with a brass shut off valve.
It is supplied with three different size screw on suction pads. Simply select the correct size pad to remove the dent, apply shop air and use the slide hammer.
Compressed air is exhausted through the handle and unit is fitted with 13" (330mm) inlet hose with 1/4" NPT air plug.
Slide Hammer Length: 24" (600mm)
Pad Sizes:
60mm Screw On suction Pad
120mm Screw On Suction Pad
150mm Screw On Suction Pad
It is supplied with three different size screw on suction pads. Simply select the correct size pad to remove the dent, apply shop air and use the slide hammer.
Compressed air is exhausted through the handle and unit is fitted with 13" (330mm) inlet hose with 1/4" NPT air plug.
Slide Hammer Length: 24" (600mm)
Pad Sizes:
60mm Screw On suction Pad
120mm Screw On Suction Pad
150mm Screw On Suction Pad
Product Questions and Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.