Description
Used for cutting, trimming and outlining of sheet plastics, tin plate, aluminium and other metals. Capacity in sheet Steel is 1.0 to 1.6mm. Double cutting action with central waste curl leaves both sides of the cut straight and clean without distortion. Useful in tinsmith and sheet metal shops, auto body repair shops, fibreglass factories, sheet metal duct manufacture as well as Steel and aluminium roofing, and siding installation.
• double-cutting action with central waste curl — leaves both sides of cut straight and clean without distortion
• for fast cutting of sheet metal
Model # si4500 Specifications
cutting Width: 5.4mm
Cutting Capacity: 1.6mm (16 gauge) No-Load Speed: 2,000rpm
Weight: 1.26kg Noise Level: 83dba Vibration: 4.9m/s2
Avg. Air Consumption: 3.5cfm Air Inlet Size: 1/4"
Minimum Hose Size: 10mm
Shinano air tools are guaranteed against defect in Materials or workmanship for a period of 12 months.
Shinano Inc. Has been manufacturing industrial air tools in Japan since 1969.
All tools are designed to operate at 90psi with adequate air volume as indicated in the Specifications. Air supply should be capable of delivering at least 4 times the Average Air Consumption of each tool. Use a compressor of sufficient Capacity to ensure the tool has optimum power and torque. We recommend properly designed compressed air facilities so that
air tool performance is not compromised.
• double-cutting action with central waste curl — leaves both sides of cut straight and clean without distortion
• for fast cutting of sheet metal
Model # si4500 Specifications
cutting Width: 5.4mm
Cutting Capacity: 1.6mm (16 gauge) No-Load Speed: 2,000rpm
Weight: 1.26kg Noise Level: 83dba Vibration: 4.9m/s2
Avg. Air Consumption: 3.5cfm Air Inlet Size: 1/4"
Minimum Hose Size: 10mm
Shinano air tools are guaranteed against defect in Materials or workmanship for a period of 12 months.
Shinano Inc. Has been manufacturing industrial air tools in Japan since 1969.
All tools are designed to operate at 90psi with adequate air volume as indicated in the Specifications. Air supply should be capable of delivering at least 4 times the Average Air Consumption of each tool. Use a compressor of sufficient Capacity to ensure the tool has optimum power and torque. We recommend properly designed compressed air facilities so that
air tool performance is not compromised.