Description
A slow Speed industrial die grinder For use with mounted stones, mini drum sanders, polishing stones, felt bobs, mounted wire and abrasive brushes, etc where slower Speed is required.
Polymer body cover absorbs Vibration and insulates from cold metal motor housing.
• planetary geared die grinder. Low Speed and high torque industrial unit
• compact & Lightweight industrial unit
• feather touch throttle lever for easy operation
• rubber body to protect your hands from the cold
Model # SI2015A Specifications Collet: 6mm
No-Load Speed: 5,500rpm Net Weight: 0.91kg Overall Length: 217mm Noise Level: 95dba Vibration: < 2.5m/s2
Avg. Air Consumption: 4.2cfm Air Inlet Size: 1/4"
Minimum Hose Size: 10mm
Shinano air tools are guaranteed against defect in Materials or workmanship for a period of 12 months.
Shinano Inc. Has been manufacturing industrial air tools in Japan since 1969.
All tools are designed to operate at 90psi with adequate air volume as indicated in the Specifications. Air supply should be capable of delivering at least 4 times the Average Air Consumption of each tool. Use a compressor of sufficient Capacity to ensure the tool has optimum power and torque. We recommend properly designed compressed air facilities so that air tool performance is not compromised.
Polymer body cover absorbs Vibration and insulates from cold metal motor housing.
• planetary geared die grinder. Low Speed and high torque industrial unit
• compact & Lightweight industrial unit
• feather touch throttle lever for easy operation
• rubber body to protect your hands from the cold
Model # SI2015A Specifications Collet: 6mm
No-Load Speed: 5,500rpm Net Weight: 0.91kg Overall Length: 217mm Noise Level: 95dba Vibration: < 2.5m/s2
Avg. Air Consumption: 4.2cfm Air Inlet Size: 1/4"
Minimum Hose Size: 10mm
Shinano air tools are guaranteed against defect in Materials or workmanship for a period of 12 months.
Shinano Inc. Has been manufacturing industrial air tools in Japan since 1969.
All tools are designed to operate at 90psi with adequate air volume as indicated in the Specifications. Air supply should be capable of delivering at least 4 times the Average Air Consumption of each tool. Use a compressor of sufficient Capacity to ensure the tool has optimum power and torque. We recommend properly designed compressed air facilities so that air tool performance is not compromised.