Description
TP3501 - Duratomic® technology coated grade. Enhanced edge toughness still with the characteristic high wear
resistance intended for versatile performance in turning applications in steels as well as stainless steels
especially including interrupted cuts.
Ti(C,N) + Al2O3 + Used Edge Detection (Chrome)
-MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm/rev. Good capacity for medium rough machining.
Indicative machining range: f = 0,10–0,40 mm/rev, ap = 0,2–3,0 mm.
resistance intended for versatile performance in turning applications in steels as well as stainless steels
especially including interrupted cuts.
Ti(C,N) + Al2O3 + Used Edge Detection (Chrome)
-MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm/rev. Good capacity for medium rough machining.
Indicative machining range: f = 0,10–0,40 mm/rev, ap = 0,2–3,0 mm.