Description
TP3501 is Intended for rough or intermittent turning in steels and stainless steels as well as general turning of stainless steels.
Ti(C,N) + Al2O3 DURATOMIC®
-MF3 Chipbreaker: Chipbreaker with positive cutting rake angle intended for moderately difficult stainless steel. The MF3 is also intended for light roughing in relatively soft, “tacky” steel and difficult to machine stainless steel if the depth of cut is limited. MF3 can also be used for finishing of cast iron.
Indicative machining range: f = 0,2–0,4 mm/rev, ap = 1–4 mm.
Ti(C,N) + Al2O3 DURATOMIC®
-MF3 Chipbreaker: Chipbreaker with positive cutting rake angle intended for moderately difficult stainless steel. The MF3 is also intended for light roughing in relatively soft, “tacky” steel and difficult to machine stainless steel if the depth of cut is limited. MF3 can also be used for finishing of cast iron.
Indicative machining range: f = 0,2–0,4 mm/rev, ap = 1–4 mm.