Description
TM2501 is the first choice in austenitic stainless steel alloy (SMG M1-M3), providing long, predictable tool life and toughness for a variety of component sizes and conditions
▪ TM2501 acts as a tougher alternative to TP3501 in heavy intermittent steel turning.
▪ For moderate/high cutting speeds in continuous cuts or light interruptions for medium to large-sized components (ø100-150 mm/4"-6" or larger)
▪ Complements in steels (SMG P2-P8), especially with severe interruptions
MF1 Chipbreaker: Chipbreaker intended for machining stainless steel, superalloys and titanium alloys. Type ..GG insert has a sharp, precision ground edge. Type ..MG insert has a lightly honed cutting edge for increased strength. MF1 is intended for use in semi-finishing and finishing applications.
Indicative machining range: f = 0,08–0,30 mm/rev, ap = 0,2–3,5 mm
▪ TM2501 acts as a tougher alternative to TP3501 in heavy intermittent steel turning.
▪ For moderate/high cutting speeds in continuous cuts or light interruptions for medium to large-sized components (ø100-150 mm/4"-6" or larger)
▪ Complements in steels (SMG P2-P8), especially with severe interruptions
MF1 Chipbreaker: Chipbreaker intended for machining stainless steel, superalloys and titanium alloys. Type ..GG insert has a sharp, precision ground edge. Type ..MG insert has a lightly honed cutting edge for increased strength. MF1 is intended for use in semi-finishing and finishing applications.
Indicative machining range: f = 0,08–0,30 mm/rev, ap = 0,2–3,5 mm